Nilfisk-CFM 118 AXX Single-Phase Industrial HEPA Vacuum Cleaner

Nilfisk-CFM 118 AXX Single-Phase Industrial HEPA Vacuum Cleaner
Description
Nilfisk-CFM 118 AXX Single-Phase Industrial HEPA Vacuum Cleaner
The Nilfisk-CFM 118 AXX is used for collecting fine, dry, and hazardous industrial dust in commercial and manufacturing facilities. Because it runs on standard 120V single-phase power, it is built for intermittent, localized cleanup where heavy-duty filtration is required without needing specialized three-phase electrical hookups.
Specs:
- Power & Electrical: 120V, 60 Hz, single-phase , 1 kW (1,000 Watts / ~1.34 HP), drawing approximately 7.5 to 9 Amps
- Motor Type: Single-stage bypass motor with independent cooling air to prevent dust burnout
- Airflow (Max): 95 CFM (162 m³/h or 2,700 L/min)
- Waterlift / Suction (Max): 85 inches H₂O (21.5 kPa / 215 mbar)
- Tank Capacity: 6.6 gallons (25 liters) standard wheeled drop-down canister (38-liter / 10-gallon tanks were also offered on select configurations)
- Main Filter: L-Class star-shaped polyester filter with 8.6 sq. ft. (8,000 cm²) surface area and manual external shaker
- Exhaust Filtration: Supports downstream HEPA (99.97% @ 0.3 microns) or ULPA (99.999% @ 0.12 microns) absolute filters
- Inlet Diameter: 50 mm (approx. 2 inches)
- Noise Level: 75 dB(A)
Primary Applications:
- Pharmaceutical & Chemical Processing. Used to clean up active pharmaceutical ingredients (APIs), fine powders, and spilled raw materials around mixers, tablet presses, and packaging lines (notably, the white asset tag on your unit reads Wyeth, a major pharmaceutical manufacturer)
- Food & Beverage Production. Collects dry ingredients like flour, sugar, spices, and dust around bulk ingredient hoppers and processing equipment
- Electronics & Cleanrooms. Captures microscopic particulate matter during assembly or maintenance when equipped with its HEPA or ULPA exhaust filtration
- General Manufacturing & Workshops. Handles fine dust, metal shavings, sawdust, and dry debris around CNC machines, workbenches, and assembly stations
Specifications
| Manufacturer | Nilfisk-CFM |
| Model | 118 AXX |
| Condition | Used |
| Serial Number | 00AC750 |
| Stock Number | 5429 |
| Location Code | B7 |
| Dimensions (l x w x h) | 40" × 48" × 55" |









